What needs to be on the construction drawings?
• Occupant load
• Construction type.
• Use Group(s)
• Scale, 1/4 inch = 1 foot minimum, showing all dimensions.
• Code and Year used for the design.
• Floor plans of all levels with all rooms labeled.
• Location of smoke detectors.
• Elevations (front, sides, and rear) indicating window and door dimensions.
• Insulation R-values. ( An Energy Code Compliance Report must be included with your application for more information see the States web site http://www.state.nj.us/dca/codes/bulletins_ftos/list_of_bulletins_ftos/b_07-2.pdf )
• Location of safety glazing.
• Manufacturer's design specifications for prefabricated fireplaces.
• Foundation plan.
• Footing details (minimum footing depth is 30").
• Structural framing plans of all levels accurately detailing all members.
• Structural details of connections.
• Typical wall section with sheathing thickness and type (special products or devices require a research or evaluation report).
• Roof framing plan.
• List of material specifications including, but not limited to: grade and species of lumber, concrete strength, and steel strength.
• List of design load criteria: live load, dead load, snow load, wind load, bearing capacity, and lateral earth pressure (for Wall Twp.: ground snow load = 20 PSF and wind speed = 110 mph).
• Name of the person preparing the drawings.
• If plans are prepared by a registered design professional, both sets of plans must bear the original seal and signature.
• Truss Shop Drawings for pre-engineered floor or roof trusses.
• Plumbing fixture layout and riser diagram.
• Electrical plan.

Show All Answers

1. When is a permit required?
2. My water heater broke on a Friday night, do I need to wait until Monday and get a permit before I have it replaced?
3. Do I need a permit to re-roof my house?
4. Do I need a permit to reside my house?
5. What are the Building Department’s hours?
6. When are inspections performed?
7. Can I request a specific time for inspections?
8. What is the best time to talk to an inspector?
9. What forms will I need for my permit application?
10. Can I use forms from another town?
11. Can I draw the construction drawings myself or do I need an architect?
12. How many copies of the construction drawing do I need to submit with my application?
13. What needs to be on the construction drawings?
14. How long will it take to get my permit after I make an application?
15. Do I need a permit for a shed?
16. Do I need a permit to put up a fence?
17. When is a permit required for a pool?
18. I’m having replacement windows installed, do I need a permit?
19. How are the fees for permits calculated?
20. My neighbor is doing work and I don’t think they have a permit can an inspector come check it out?
21. Do I need a permit to repair or replace my deck?
22. I want to install a back-up generator, where on my property can it be placed?
23. What codes are used in Wall Township?
24. Do I need a permit to re-roof my house?
25. Do I need a permit to reside my house?
26. Do I need a permit for a shed?
27. Do I need a permit to repair or replace my deck?
28. When is a permit required?